Drop-In Check Valves The Smart Choice For Industrial Application

Drop-In Check valves prevent return flow during a kick and are suitable for most drilling situations in which return flow through the drill string is a risk and normal operation requires the benefits of a full-bore sub. By preventing upward flow through the drill pipe and allowing fluid to be pumped downward to circulate the well, the valves provide the driller with the means to control the drill pipe pressures when required, significantly improving and simplifying well control.

When a blowout is about to happen,the thread connections of the kelly is screwed out immediately and a check valve is placed into the drill pipe and then pumped downward to the required place.Thus the blowout can be prevented.

When ordering please specify:

• Smallest bore in drill string through which the check valve must pass.
• Landing sub connection size and type.
• Outside diameter of mating tool joints.

• Specification	Check valve Assembly O.D.(mm)	Landing Sub O.D.(mm)	Stop Ring I.D.(mm)	Working Pressure (MPa)	API Connection
  FT89	34	89	31	35 (70)	NC26
  FT105	34	105	31		NC31
  FT121	50	121	46		NC38
  FT159	54	159	50		NC46
  FT168	68	168	64.5		NC50
  FT178	68	178	64.5		5 1/2 FH
  FT203	68	203	64.5		6 5/8 REG

  

Industrial Application Check Valves

Drop-In Check Valves

Drop-In Check Valves The Smart Choice For Industrial Application Images